Double Glazing Locks Repair

If a double-glazed window does not close, it causes draughts that allow valuable heat to escape. It also weakens your home security barriers and puts you at risk of burglary.

Over time, double-glazed window hinges as well as seals, handles and handles may become damaged. If this is the case it can impact the functionality of your windows and void any warranties you might have.

Locks that aren't working

While many take great care in installing anti-burglar devices for their gates and doors but they often forget that windows are among the top targets for burglars. A poor lock could cause drafts to enter the home, which can allow valuable heat to escape, and weaken the security of your home.

If you find that your upvc repair window locks aren't working, there's an excellent chance that the lock mechanism has become blocked. This usually happens due to the gearbox breaking in one component. This could cause the handle not to open, but instead to turn 360 degrees. This issue is typical of uPVC windows, however it can also occur in tilt-and-turn windows and sliding sash window.

When this happens it is possible to unlock the lock by applying pressure to the lever handle. This can help to unblock the gear box and allow the opening of the window. If this doesn't work, you may have to replace the window lock mechanism completely.

Most modern uPVC windows use espagnolette locks. They are an internal locking system that secures the window using locking cams that resemble mushrooms that are built into the frame. The handle turns on the gearbox, which activates the cams for either up or down movement. The spindle of the lock can break which causes the handle to move but the window to open or close.

A damaged transmission could make your window appear locked but it's not. This could happen when the rods in the centre, also referred to as crocodile teeth fixings within the gearbox break off. If this is the situation, Misty Glaze can supply and fit replacement rods to restore the functionality of your window.

It is important to not force a broken or stuck lock. This could cause a lock to snap or break, especially if you have windows made of uPVC that expand and contracts when temperatures change. It is best to contact an expert locksmith who will diagnose the problem and repair it.

Sticky Doors/Window

It is annoying to find doors and windows that are stuck, but they may also be indicative of more serious structural issues. It is essential to seek professional assistance if you're having trouble opening or closing a door or window. These issues can be a result of various factors such as foundation settlement and impaired crawl space support.

Windows and doors often stick because of humidity or the frame itself. If your frames are wood, for instance, they can become brittle when exposed to moisture. This can make opening and closing them a challenge even if the hardware in good shape. The wood expands when this happens, and it pushes up against the hinges, causing friction.

If your window or door sticks in the summer and you are unable to get it to close, try using bar soap to decrease the friction. This will allow it to shrink and could solve the issue temporarily. This method will need to be repeated frequently during periods of high humidity.

A more permanent fix involves sanding the door or window frame to create an even finish. This can be done either by hand or with a power tool. A professional can also sand down and stain or paint your door or window frame to get it looking fresh and new.

If sanding and soap aren't helping it's likely that your problem stems from foundation settlement or a damaged crawl space. Look for cracks in the area. It's time to contact an expert in foundation If you notice any of these signs. Damage to the foundation can lead to uneven floors and a misaligned interior wall, which in turn causes sticking windows and doors. To avoid costly and risky repairs, it's crucial to address these problems as soon as they can be addressed. If ignored, these issues could escalate to the point where your entire house is structurally unstable. Contact the Southeast's top foundation repair experts today to schedule an inspection and repair!

Cracking/Blowing Issues

When double glazing begins to deteriorate, it may cause cracks to develop. This can be ugly and allows all the heat that has been built up in your home to escape. It can also be dangerous for your family, since the sharp pieces of glass could cause injuries when they break. It is best to repair any double glazing windows that have cracks before they get worse, as this will increase the cost of replacing the windows.

Window seals are essential to prevent drafts from entering your home and to keep air between your window panes. As time passes, these seals can shrink or become perished due to changes in the weather. If not checked, it can lead to moisture, condensation, and draughts in your home.

A professional is usually able to resolve this issue. They can repair the window seal and restore your windows back to their original state of repair. They can also suggest features that can reduce the risk of stress cracks, such as trickle ventilation for better air circulation.

You can also grease the handles and hinges of your windows and door. This will allow them move more smoothly and will allow the lock to function as it should. Apply lubricating oil to a cloth that is free of lint and rub it into the hinges and handle mechanism and also in the places that they pass through the frame (for instance, sash windows). You can also remove the handles and clean them with warm soapy water to remove any dirt or dust.

If your uPVC windows and doors aren't working in the way they should, it is essential to contact an expert to fix them. They can identify the problem quickly, and then fix it in a short time. It's safer and less expensive than attempting to fix it yourself and potentially damaging the mechanism. You will also have peace of mind knowing your home is secure and safe.